using certified raw materials and accessories, offering its customers the best combination of quality and advanced technology. SAFCO garments are mainly for Firefighters, Wildland firefighting field, Civil Protection operators but also chemical and steel industries and companies that operate in safety field.

Our Product

Firefighting Jacket EN469 OMEGA

SPESIFICATION

OMEGA model antistatic firefighting jacket for firefighters composed by 4 layers of fabric:

Outer shell in meta-aramid, Rip-Stop (anti-tear), IOR (hydro-oleo-repellent), antistatic of 220 gr/m² certified Oeko-tex®. Composition: 93% meta-aramid, 5% para-aramid, 2% antistatic fiber.
Waterproof Moisture barrier: bicomponent membrane PU/PTFE F.R sewn and heat sealed. Thermal barrier: made of 100 g/m² recycled 100% aramid felt. Lining: 50% aramid 50% Viscose FR fabric for a total weight of 125 g/m².
Waterproof, thermal barrier and lining are assembled in a single quilted compound.

– Set-in sleeves with fastening flap adjustable by Velcro®
– Stand-up American collar for throat’s high protection
– Elasticated wrists with an inner sleeve, anti-absorbent sleeve bottom edge in silicon-coated flame-retardant fiber
– Central opening with quick release brass zip
– In comparison to the standard model PRO, it is elongated of 10 cm.
– N. 2 pockets covered by flap fixed by Velcro® F.R hook and loop tape
– N. 1 radio pocket positioned on the left side chest
– N. 1 torch holder pocket fixed by Velcro® F.R on right upper chest
– N. 1 document holder pocket closed by a zipper accessible to the closed jacket
– N. 1 internal pocket fixed by a fastener with Velcro® F.R.
– Fabric doubling on shoulders and elbows with aramid felt padding
– High reflective yellow/grey perforated and certified F.R. stripes of 50 mm., positioned on the forearms, on the chest circumference and at the bottom of the jacket

Customizations on request.

Firefighting helmet VULCAN LIGHT CV103 (type A)

SPESIFICATION

Vulcan helmet has been designed for the growing demands and needs of the Fire Brigade. The new solutions adopted for its realization improve the performance characteristics, significantly reducing the weight of the same (gr. 1290), 

The helmet compliants to the following standards:

PPE of III category, EN 443: 2008, EN 16471: 2014, EN 16473: 2014, CW/MED/367/2016 (MED certificate).

Safety in extreme conditions

  • Resistance of the shell by impact, drilling and lateral compression.
  • Complete protection in low and high temperatures, excellent resistance to flame and heat flows (tested at 1000°C).
  • Resistance to splashes of molten iron.
  • Face protection: transparent or golden panoramic visor meets the requirements of standards EN 171: 2002. EN 14458: 2004 e EN 166: 2001 (OPTICAL CLASS 1) and is resistant to high temperature, flames and chemicals.
  • Reflective bands that ensure good operator visibility

Maximum comfort

  • The visor can be lowered in the presence of a full face mask, suitable for wearers of corrective glasses and can be replaced quickly and easily.
  • Wide range of circumference sizes adjustable with a wheeling system.

The neck protectors are resistant to thermal radiation and flames; available in 4 models:

  • In flame retardant fabric short model
  • In flame retardant fabric long model
  • In leather
  • In aluminized fabric

Finishing elements that improve comfort

  • Internal padding and linings made of Nomex® and soft natural leather, silicone chin
  • Wide range of accessories suitable for the use of gas masks, torches, and provision of wireless communication systems.
  • Possibility of customization.
  • Outer shell available in any color, including photoluminescent and chrome coating.

Firefighting gloves Dynamic GRIP EN 659

SPESIFICATION

Five-finger firefighting glove certified for firefighters.

Back in flame-resistant 1.3-1.5 mm bovine nappa leather; palm, thumb and part of the index finger in 100% para-aramid fabric with polymer coating highly resistant to abrasion, perforation and cuts.

High level of permeability to water and chemicals compliant with EN 388: 2003.

Split leather cuff with elasticated wrist, artery protection reinforcement; fastener on the adjustable cuff with F.R. velcro, 25 mm fireproof yellow reflective band.

Inner glove in 100% Kevlar mesh, internal membrane in breathable polyester. All seams are made with Kevlar yarn.

The glove is certified according to:

  • EN 420:2003 + A1:2009
  • EN 659:2003 + A1:2008/AC:2009 – PPE III cat.
  • Regulation SOLAS 74

Firefighting Boots FIAMMA PRO (Type C)

SPESIFICATION

Boots for fire fighters type C, made of grain leather in black color of the thickness 2.0 / 2.2 mm. This type of boots is made of water repellent treatment. WINDTEX fabric lining, hypoallergenic, water-repellent, breathable fabric.

  • Internal anti-perforation insole in Matrix multilayer fabric (kevlar)
  • Removable insole, anatomically shaped in THINSULATE
  • Steel protection tip
  • Fireproof closing laces
  • Reinforced central hinge (step 8)
  • Internal Fussbett in THINSULATE
  • Non-slip rubber sole with excellent sculpting for rough terrain, high heat resistance, maximum insulation in the cold, resistance to oils and hydrocarbons.
  • Malleolus protection by padding
  • Rear bellows for maximum comfort

Flame retardant antistatic balaclava SS2

SPESIFICATION

Balaclava made of a double layer of 200 g/m² flame retardant interlock knitted fabric composed by 49% aramid fiber, 50% viscose F.R, 1% antistatic fiber.

Excellent characteristics of comfort and absence of limitation of both the visual and auditory fields. Features shoulder and chest stretch to increase neck protection.
The front opening allows you to wear a full-face mask.

in écru colour: cod. 80.0105.029
in blue colour: cod. 80.0105.032

Standards:

EN ISO 13688: 2013
EN 13911: 2017 – specifically for firefighters
EN ISO 11612: 2015 – levels A1 B2 C1 F1
EN 1149-5: 2018 – antistatic
EN ISO 20473: 2013 – antibacterial finish
PPE of III category

0